Stone Textured Wall Paint Real Stone Paint Waterproof Paint Replace Natural Lacquer DurableTexture Acrylic Resin
Advantages:
1. Imported super fine raw materials make the film feel Smooth when touch in hand.
2. Good mildew, alkali resistant, long service life.
3. Excellent adhesion: Super fine powers make the paint penetrate into the wall body, contact well
with the substrate and long lasting.
4. Easy application: Easy conduct with brush, roller or spray gun, also very suitable for DIY house
decoration.
5. Highly cost effective.
Brushing Area:3.5 kilograms per square meter
Name |
Real Stone Paint |
Main Raw Material |
Acrylic |
Usage |
Appliance Paint, Building Coating |
Other Names |
Stone Texture Wall Paint |
OED/OEM |
Accept |
Application Method |
Spray |
State |
Liquid Coating |
Color |
Customized Colors |
Appearance |
Liquid Viscous Paint |
Shelf Life |
Packed In Drum |
Brushing Area |
3.5 Kilograms Per Square Meter |
Introduction:
Tehao Natural Lacquer is made of advanced water-borne pure acrylic resin with natural
inorganic stone material, and needs to be thickly coated. Color stone size combination, color foil
chic, which makes it the best substitute for natural rock paint.
Features:
• The surface of the coating is rough, it can easily create the texture like natural stone.
• Not affected by the base surface modeling, can be suitable for a variety of base surface, and
can be arbitrarily coated according to the building modeling.
• The colors are designed with high technology so they won't fade. Excellent UV resistance.
• Excellent weather resistance, alkali resistance, durability and tightness.
Application:
Building interior wall, exterior wall, line board, decorative modeling, special modeling, etc.
Applicable base surface:
Cement mortar surface, concrete surface, plasterboard, wood board, all kinds of fiberboard,
metal plate, etc.
Surface requirements:
Cement-based surface: use cement slurry or special putty to smooth plastering surface defects or
hollows.
Wood base: clean up, then spray oil seal primer.
Metal base: Grind the base with 360# sandpaper, clean it with appropriate chemical solvent, and
then coat with special primer.