Water And Water Stone Paint Waterborn Coating Stone Wall Paint Similar To Dulux imitation granite OEM
Alture weather resistant exterior wall texture coating.
Water-in-water colorful coating is a series of products of water-based environmental protection coating system, also known as liquid stone. It is made of high-tech modified resin and pigments with good stability, all-water-based, one-time spraying colorful granite paint, the color produced is more realistic and more durable, according to the granite samples provided by the designer, the degree of simulation can reach 99%, and it is the best product to replace the outer wall granite.
Brushing Area:1 kilograms 2 square meters
| Name |
Imitation Stone Paint |
| Main Raw Material |
Acrylic |
| Usage |
Building Coating |
| Other Names |
Spray Stone Paint |
| Application Method |
Spray |
| State |
Liquid Coating |
| Main Component |
Acrylic Emulsion, Natural Stone Powder |
| The Oretical Consumption |
3~4kg/m2/coat (thickness Of Dry Film 2mm) |
| Touch Dry |
2H/20-25℃ |
| Totally Dry |
48H/20-25℃ |
| Recoat Time |
2-6H Based On Temperature>5℃& Humidity<85% |
Introduction:
Colorful Stone-Liquid Paint is made of special high-tech water-based weather-
resistant resin and developed by advanced production technology. It is a new high-
grade product of water-in-water imitation granite colorful texture.
Features:
High-tech building paint with colorful stone texture
Compared with traditional exterior wall coatings and collage tiles, the multi-layered
granite texture imitated by colorful impression stone can fully express the texture of
natural stone and enhance the outstanding value of architecture. Through careful
planning and design, the film modeling style is varied and highly textured;
Excellent performance, international environmental protection color recording
coating
The paint has superior stain resistance and durability. The construction process is
simple, the construction base is not limited, nor will it cause pollution of the
construction environment.
Application:
Building interior wall, exterior wall, line board, decorative modeling, special
modeling, etc.
Applicable base surface
Cement mortar surface, concrete surface, the external insulation plastering surface,
fiber cement board, wood board, etc.
Surface requirements:
Base surface: the strength should be above 5kgf/cm; Water content below 10%; PH
below 10.
Climate: temperature above 5̊C; Air humidity below 85%; Wind speed below 5m/s
