Brushing Area:1 kilograms 8-10 square meters
inorganic paints are tested to meet the GB-18582 "Limits of Hazardous Substances in Building Wall Coatings" standard. It is free from VOC, formaldehyde, heavy metals and other harmful substances.
Application
It’s suitable for a variety of concrete, cement mortar, gypsum board, brick wall, putty and other base surfaces.
| Name |
Inorganic Coating |
| CAS No |
N/A |
| Main Raw Material |
Potassium Silicate, Silicate Cement, Quartz Sand, Inorganic Pigments, Nano |
| Usage |
Building Coating, Interior Wall Paint |
| EINECS No. |
N/A |
| Application Method |
Spray, Roller |
| State |
Liquid Coating |
| Fire-resistant |
Class A |
| Advantage |
Enviromental Friendly |
| Certificate |
ISO9001/French VOC Regulations A+ |
| Application |
Interior |
| Gloss |
Matt Glossy |
| Color |
Optional Color Or Customized Color |
| Package |
25kgs/barrel |
| Storage |
Cool Dry Place |
| Coverage Rate |
Full Set Conbination Covers 15㎡ |
| Construction Environment |
Temperature ＞10℃, Relative Humidity＜80% |
| Coagulation Time |
6 Hours ( Temperature ≈ 25℃, Relative Humidity＜70%) |
Introduction:
The principle of Reflective Insulation Coating is to control the solar reflectance, infrared emissivity
and thermal conductivity of the material, so as to obtain the effect of high reflectance, high emissivity and
low thermal conductivity.
On the one hand, the high reflectivity of the material can reflect the visible and infrared energy of the
sun. At the same time, the high radiation performance of the material is used to dissipate the absorbed
energy in the form of thermal radiation, reducing the surface temperature of the material and reducing the
heat into the internal environment. On the other hand, the low thermal conductivity of the coating further
blocks the transfer of heat to the internal environment, and maximizes the temperature of the internal
environment. Thus serves the purpose of insulation and heat preservation.
Features:
Excellent heat insulation performance, excellent weather resistance, color preservation, waterproof, acid and alkali
resistance, wash resistance, stain resistance, excellent crack resistance, convenient construction, labor and time-saving,
simple maintenance.
Consumption:
According to the base, about 2-3kg per square meter.
Process:
Spraying, brush coating, rolling coating and other methods can be used. Before construction, confirm that the substrate is
clean and dry.
Diluent: Clean water, 5 ~ 15% dilution (according to the specific situation, decide whether to dilute and how much
dilution).
Drying time:
Surface dying time﹤1h,
Totally dying time: about 24h,
Film-forming time: about 168h.
