High-Tech Water-Based Weather-Resistant Stone-Liquid Paint Same As 3Trees
Uses:
- Exterior walls, also it can be easily applied as a waterproofing material for roofs and balconies, canals,chimney surroundings, gutters and strainers in wide area and detailed, flat or inclined roofs.
On all types of external surfaces coated with plaster or paint
On old coatings
On exterior walls, on metal, glass, wood surfaces, etc.
During the painting of gross concrete or pre-fabricated structures.
Brushing Area:1 kilograms 2 square meters
| Name |
Exterior Wall Paint Engineering Paint/Exterior Wall Paint |
| Main Raw Material |
Acrylic/Acrylic Resin |
| Usage |
Building Coating |
| Other Names |
Acrylic Acid |
| OED/OEM |
Accept |
| Application Method |
Spray |
| State |
Liquid Coating |
| Color |
Transparent |
| Type |
Water-based Liquid Coating |
| Appearance |
Liquid Viscous Paint |
| Shelf Life |
>20 Years |
| Brushing Area |
7 Square Meters Per Kilogram
|
Introduction:
Colorful Stone-Liquid Paint is made of special high-tech water-based weather-
resistant resin and developed by advanced production technology. It is a new high-
grade product of water-in-water imitation granite colorful texture.
Features:
High-tech building paint with colorful stone texture
Compared with traditional exterior wall coatings and collage tiles, the multi-layered
granite texture imitated by colorful impression stone can fully express the texture of
natural stone and enhance the outstanding value of architecture. Through careful
planning and design, the film modeling style is varied and highly textured;
Excellent performance, international environmental protection color recording
coating
The paint has superior stain resistance and durability. The construction process is
simple, the construction base is not limited, nor will it cause pollution of the
construction environment.
Application:
Building interior wall, exterior wall, line board, decorative modeling, special
modeling, etc.
Applicable base surface
Cement mortar surface, concrete surface, the external insulation plastering surface,
fiber cement board, wood board, etc.
Surface requirements:
Base surface: the strength should be above 5kgf/cm; Water content below 10%; PH
below 10.
Climate: temperature above 5̊C; Air humidity below 85%; Wind speed below 5m/s
